中文
English
Home > Products > Wireless Paging System> Wireless Paging System > Wireless Table Service Bell

Wireless Table Service Bell

Model:
WS-TSB

This product is wireless, and doesn´t need to be installed. Customers can get best service in short time and with least manpower. It can be used in many occasions, like restaurants, hospitals, bloodmobile, ticket offices, amusement parks, banks financial center, and so on. The product includes one main device and Install up to 998 service calling systems, also there are 16 types of ring tone ***ions for you to choose. This product comes with a rope for service calling systems to fix on tables and so on.

APPEARANCE

External Appearance


Wireless Caller Service System: Service Bell Master + Service Bell Remote Control

無線顯示服務鈴系統-服務鈴主機+服務鈴子機-尺寸圖E.jpg


Wireless Caller Service System: Two-Way Transceiver RD-232H (RS-485 Interface) + Service Bell Remote Control

無線顯示服務鈴系統-服務鈴專用RD-232H(RS-485界面)+服務鈴子機-尺寸圖E.jpg



Communications architecture


無線顯示服務鈴系統-服務鈴主機+服務鈴子機-通訊架構說明E.jpg

Transmission Structure:

When the Service Bell Remote Control is pressed to call, it sends a signal to the Wireless Caller Master. Upon receiving the signal, the Master responds with an acknowledgment (ACK) to the Remote Control. Once the Remote Control receives the ACK, the button light will turn on. After the system dispatches the task, the Master will send a signal to the Remote Control to clear the dispatch request, causing the Remote Control light to turn off.


無線顯示服務鈴系統-服務鈴專用RD-232H(RS-485界面)+服務鈴子機-通訊架構說明E.jpg

Transmission Structure:

When the Service Bell Remote Control is pressed to call, it sends a signal to the dedicated Two-way Transceiver RD-232H (RS-485 interface). Upon receiving the signal, the RD-232H (RS-485 interface) responds with an acknowledgment (ACK) to the Remote Control. Once the Remote Control receives the ACK, the button light will turn on. After the system dispatches the task, the RD-232H (RS-485 interface) will send a signal to the Remote Control to clear the dispatch request, causing the Remote Control light to turn off. 




FEATURES

Application


     



服務鈴應用E.jpg


/upload/1531220017981382.gif/upload/1531220017292788.gif/upload/1531220017756240.gif/upload/1531220017167522.gif



SPECIFICATION

Technical specifications

 

High sensitivity wireless connection with up to 150 meters transmits range.

Install up to 998 service calling systems in single area.

16 types of ring tone.


Receiver(SCR)
Frequency433MHz/868MHz/902MHz
SensitivitySINAD
ModulationFSK
Remote DistanceMax 150M(open environment)
Display Type4"7 stage displayer X 3
Power SupplyDC 12V/1A Stable voltage power supply
Power ConsumptionStand by : 28mA;Active : Max700mA
Operation Temperature-10℃~40℃
Storage Temperature-20℃~60℃
Storage Humidity10%~90%
Size372mm(L) X 213mm(W) X 45mm(H)
OthersStatus LED indicator X4


Transmitter(SCT)
Frequency433MHz/868MHz/902MHz
RF Power10mW
ModulationFSK
Power SupplyAlkaline battery (AAA) X 2
Power ConsumptionStandby : 20uA; Active : 37A
Battery Life6000times
Operation Temperature-10℃~55℃
Storage Temperature-20℃~60℃
Storage Humidity10%~90%
Size68mm(D) X 27mm(H)
OthersStatus LED indicator X1(Green),Low Battery LED X (Red)